Robocell – Robot Arm Generator for Blender

Rigged industrial robot arms with IK, tools and liveries

See all my Blender addons >

Robocell builds rigged industrial robot arms in one click: six-axis factory arms, collaborative cobots, four-axis palletizers, SCARA assembly robots, delta pickers and cartesian gantries. Every robot is a real armature with an IK target, so you move one empty and the whole arm follows, with every axis kept inside its real range.

Pick one of 46 designs from a picture gallery, then change anything: arm lengths, offsets, link thickness, housing style, mount, tool, hoses and paint. The robot rebuilds live while you drag a slider, and it stays fully rigged after every change.

46 ready designs

Six-axis arms, cobots, palletizers, SCARAs, deltas and gantries: pick one from the picture gallery and it builds, fully rigged, in a second.

46 ready designs

A real rig that moves

Every axis is a bone with its real range. Animate the joint sliders or move one IK target and the whole arm follows, gripper included.

A real rig that moves

Surprise: a new robot every click

Press Surprise for a fresh design, proportions, tool, mount, hoses and livery every time.

Surprise: a new robot every click

Eight factory liveries

Orange, yellow, white, red, blue, green, graphite and black, plus free colors, gloss and wear.

Eight factory liveries

What you get

  • 6 robot types: 6-axis articulated, cobot, palletizer, SCARA, delta and gantry (portal, cantilever and table)
  • 46 ready designs: handlers, arc and spot welders, paint robots, machine tenders, heavy lifters, lab arms, cobots, palletizers, SCARAs, deltas and gantries
  • 12 end effectors: parallel and three-finger grippers, vacuum cup and vacuum array, magnet, welding torch, spot weld gun, spray gun, spindle, dispenser, pallet fork and a bare flange
  • Real rig: IK target or joint sliders, IK limits per axis, level-keeping palletizer wrist, parallel delta arms, sliding gantry axes and a linear floor track as a 7th axis
  • Gripper fingers that open and close with one slider
  • Dress packs: corrugated, smooth or spiral-wrapped hoses that bend with the joints, counterbalance cylinder, servo motors
  • Mounts: floor plate, round and square risers, steel frame or cart, linear track, controller cabinet with teach pendant
  • Eight liveries (orange, yellow, white, red, blue, green, graphite, black) plus free colors, gloss and wear
  • Animation ready: key the IK target or the joint sliders with Blender's normal keyframes, and copy the IK pose into sliders
  • Photorealistic PBR materials that export to game engines, three detail levels

No brand names or copied models: every robot is a generic design built from real proportions and joint ranges.

Requires Blender 4.2 or newer. Tested on Blender 4.2, 4.5 and 5.2 LTS.

Install in under a minute (Blender 4.2+)

  1. In Blender open Edit › Preferences › Get Extensions.
  2. Open the arrow menu at the top right and choose Install from Disk.
  3. Pick the downloaded zip. Do not unzip it.

Questions

Which Blender versions are supported?

Blender 4.2 and newer. It is tested on Blender 4.2, 4.5 and 5.2 LTS.

Is the robot really rigged?

Yes. Every robot is an armature with one bone per axis, an IK target empty and axis limits. The body mesh is skinned to the bones, and the hoses bend with the joints.

Can I use the robots in a game engine?

Yes. Materials are standard Principled BSDF with image textures, and the armature with the skinned mesh exports to FBX or glTF. Use the Low detail level for lighter meshes.

Are these copies of real robot brands?

No. The designs are generic, built from the proportions and joint ranges of real industrial robots, without brand names or logos.

Details

Version
1.1.1
Blender
4.2 or newer
Tested on
4.2, 4.5 and 5.2 LTS
Render engines
Cycles, EEVEE
Category
Rigging
Download
2.2 MB zip
License
GPL v3
robotrobot armindustrial robotriggedikfactorycobotscaragripperautomationgeneratorprocedural
$9.00 Buy now